MarineEngine.com - Your online store for all types of marine engines and boat parts.
PHONE ORDERS
Monday - Friday
9:00 AM - 5:00 PM EST
Click for TOLL-FREE Number
Online Checkout
Special $9.95 Flat Rate Shipping
(800) 209-9624 | Home | Contact | Shipping | Returns | Cart View your shopping cart.
Part Number Search
Shop by engine/drive part number.
Original & matching parts for sale.
Manuals & Accessories
Shop by description, item number
or manufacturer's model number.
Boat Repair Forum Boat Repair Forum   Boat Video Gallery Video Gallery
   
Results 1 to 4 of 4
  1. #1

    Default Yanmar 3gmf fuel problem

    I have a 3gmf engine in a Hunter 34. It has high hours, but the oil is changed every 50 hours and it has a Racor 10 micron fule filter and that has be changed several times. It has plenty of fuel in the tank and all the fuel lines have been changed. What happens is the engine will die , but after bleeding the system it will start back up and run for sometime. Here is the latest scenario: It sat for 30 days, but started right up and ran for 9 minutes. I bled the system, restarted and it ran for 40 minutes, bled the system again and it started and ran for about an hour and a half when I shut it off. Suggestions

  2. #2
    Join Date
    Jan 2012
    Location
    Giessendam, Zuid-Holland, Netherlands, Netherlands
    Posts
    102

    Default Re: Yanmar 3gmf fuel problem

    You really have some air entering the system. Some line is leaking. You could install a piece of clear hose, just to look for the air in the fuel line.

  3. #3

    Default Re: Yanmar 3gmf fuel problem

    Hi, are you filling the racor with fuel before bleeding the air ?? Fillit up bleed the engine and run at high idle for 20 minutes or until it stalls. Remove the top from the racor if the level of fuel has dropped in the filter more than an inch your air leak is between the racor and the tank, if the fuel level did not drop it is at the racor to the engine. Also what racor model are you using ?? Do you have brown stringy bacteria in the filter ??
    Charlie w.

  4. #4

    Default Re: Yanmar 3gmf fuel problem

    Make sure your tank vent is not clogged also. You can simply remove the fuel fill cap, run the engine and see if it still stalls or not. I have also seen several defective Racor filter element, so you can try changing it also.

Similar Threads

  1. 3GMF seized need opinions
    By pheidingsfelder in forum Yanmar
    Replies: 2
    Last Post: 05-23-2011, 10:35 PM
  2. Repowering 3GMF to 3GM30
    By freedbill in forum Yanmar
    Replies: 0
    Last Post: 07-17-2010, 09:56 AM
  3. Yanmar YSE8 ran out of fuel
    By jaredandrew206 in forum Yanmar
    Replies: 0
    Last Post: 03-14-2010, 03:38 PM
  4. Yanmar tach problem
    By Don Brown in forum Yanmar
    Replies: 0
    Last Post: 08-06-2008, 09:16 PM
  5. Yanmar YSE 12 fuel pump problems
    By scottyc in forum Yanmar
    Replies: 5
    Last Post: 04-16-2008, 11:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •