DavidW2009
Regular Contributor
I have seen a photo of a 90 HP Chrysler with the intake ports enlarged. The man who posted it claimed noticeable HP increase, 10-15 HP increase.
As best I can tell, the cylinder head and pistons will have to be removed. The ports are then Dremeled from round to a larger rectangular shape. (See attached photo).
Has anyone here done this or had expereince on performing this job?
As best I can tell, the cylinder head and pistons will have to be removed. The ports are then Dremeled from round to a larger rectangular shape. (See attached photo).
Has anyone here done this or had expereince on performing this job?
Attachments
Last edited: