Logo

Steering wheel

FredZ

New member
Hi, I need to change the steering wheel on my old lund boat. In order to take the old one off. I have to take out two screws out of the back side of the wheel, that are about three inches from the center.
I am new to boats and don't know how many ways steering wheels are attached. Is mine a common one? Is there a name for it? Will finding a new wheel be hard to find.? thank you for the help.
Fred
 
You should eiter have three or four screws or a nut in the center.take it off and see if you have splines if so count them and check diameter of shaft and go match one up.there are different types.What brand of steering sysem is it
 
OK. I finally got the screws out of the back of the wheel. All that did was take off the cover over the nut.
The nut is on a five eights shaft with a key in it. I don't know yet if the shaft is tappered or not, because I have not been able to get the wheel to come off the shaft. It is soaking in penetrating oil and I will try again. Thank you for the help.
 
Back
Top