PABOATER1949
New member
My 8 HP Nissan (2010) with only about 8 to 10 hours on it blew the head gasket already. Upon removing the head I found the head bolts to torqued VERY unevenly. Some loose some very tight. Pretty poor workmanship! The gasket gave way on the top cylinder where the bolts were loosest.
Everything is now cleaned up and ready to go back together except for one thing. Stupidly, I forgot to mark the positions of the flywheel and camshaft before removing the toothed belt. I have no clue how to set the ignition timing and camshaft.
Can someone please help me get the engine back in time?
The model is NSF8 A3 - Manual Start, Manual Tilt, Short Shaft
Thanks!
Everything is now cleaned up and ready to go back together except for one thing. Stupidly, I forgot to mark the positions of the flywheel and camshaft before removing the toothed belt. I have no clue how to set the ignition timing and camshaft.
Can someone please help me get the engine back in time?
The model is NSF8 A3 - Manual Start, Manual Tilt, Short Shaft
Thanks!