i have a 1996 70hp force ,,i believe it have the thunderbolt ignition system on it ,unfortunatly i only have 1 volt comeing out of one of the yellow charge wires but 6 volts riseig to 12 on the other ,,from the rectifier/regulator i have onlt about 1 volt comeing from the red charging wire but 6 riseing to 12 when reved from the grey wire which i beleive is for a rev counter ,,could i safly connect the gray to my battery to use this for charging ???or .......i have a older ignition system from a crysler ,,could i use the stator from that ,,or the stator and trigger ,,,,,,or would this not work with my controll box ,,,any help would be very king ,,thanks