Logo
Results 1 to 2 of 2

Thread: Fuel mixture

  1. #1
    Join Date
    Jun 2011
    Location
    Fenton, MI
    Posts
    4

    Default Fuel mixture

    I keep reading these threads on fuel mixture and the post are all over the place so I just want to make sure I got this right. I should be running 16:1 or 24:1 mixture and because I have a water cooled engine I can use TC-W3. I have a 59 Elgin 40HP, I was reading all these threads last year stating that it was ok to run it at 40:1 or even 50:1 but I was just given the manual and it states 3/8 pint per gallon, which is 6oz/1gal. So going by that it should be between 16:1 and 24:1. Does this sound right?

    Thanks
    Nick

  2. #2
    Join Date
    Aug 2010
    Location
    Bank of the Ohio river
    Posts
    138

    Default Re: Fuel mixture

    yep it sounds right, you know 2 cycle oil has improved since 1959 and many believe you can be safe running at higher ratios, I think mainly this depends on the type of bearings your outboard has, if there bushings then I say no but if there needle bearings then I do....really its voodoo oil sience and your better off running the 16-24:1 ration to protect the old gem...you may need to decarb more often but thats no big deal.

Similar Threads

  1. Fuel Mixture
    By jamiel in forum Johnson Evinrude Outboard Archive
    Replies: 9
    Last Post: 09-16-2008, 10:03 PM
  2. Oil fuel mixture
    By ryan ouellette in forum Mercury Mariner Outboard Archive
    Replies: 1
    Last Post: 06-26-2008, 04:06 AM
  3. Oil to fuel mixture
    By Chris Michalowski in forum Mercury Mariner Outboard Archive
    Replies: 1
    Last Post: 06-09-2008, 04:48 PM
  4. Fuel mixture
    By waldorftbeagle in forum Mercury Mariner Outboard Archive
    Replies: 5
    Last Post: 10-16-2007, 11:14 AM
  5. Fuel Oil Mixture
    By skip in forum Outboard motors archive 2000-2004
    Replies: 3
    Last Post: 09-21-2003, 11:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •