Is there anyone out here that might be able to give some advice on what to try to fix my problem?
I have just changed the coil, points, disributor cap and rotor on my boat. It starts up just fine, runs well for a little while but after about 15 minutes at +- 3,000 rpm, the engine begins to miss and loses power to the point where it'll stallout when put into gear.
I have re-checked the point gap and thought I had it fixed but am experiencing he same problem.
Any idea's?
I have just changed the coil, points, disributor cap and rotor on my boat. It starts up just fine, runs well for a little while but after about 15 minutes at +- 3,000 rpm, the engine begins to miss and loses power to the point where it'll stallout when put into gear.
I have re-checked the point gap and thought I had it fixed but am experiencing he same problem.
Any idea's?