MrCrabs
Regular Contributor
Mrcrabs Favorite Eska related Links and Resources
http://www.marineengine.com/newparts/part_details.php?pnum=SIE18-3054
Eska impeller, fits most single and twin Eska's. Except for the old style tall Clinton type, some late model Eskas use a impeller with a plastic key, make sure you check before you order for proper fitment
![eska impeller.jpg eska impeller.jpg](https://www.marineengine.com/boat-forum/data/attachments/4/4333-2c158b2187b3ce38482c86210410c421.jpg)
http://www.marineengine.com/newparts/part_details.php?pnum=SIE18-5176
This coil has been found to be well suited to replace the Pulse transformer for the Solid State Ignition on the both the single cylinder Eska and the twin cylinder 9.9 & 15 hp
http://www.marineengine.com/newparts/part_details.php?pnum=SIE18-5170
We have had excellent results using the Sierra dual coil for the Twin cylinder Ekas, Makes mounting much easier, the Dual ignition coil (Mallory) part # 9-23104 will work equally as well
http://www.marineengine.com/newparts/part_details.php?pnum=SIE18-7137
Shift shaft seal replacement made easy, The old raidial shaft seal is retained and the OE wiper is replaced by the OMC O ring, a simple brass washer is modified to act as a retainer and glued down or you can drill and tap for a screw, I have found 3M 847 rubber gasket maker makes a excellent glue, you may contact me by Personal Message to MrCrabs for further details,
![100_1873.jpg 100_1873.jpg](https://www.marineengine.com/boat-forum/data/attachments/4/4323-4e2db48177ef565ef8ffaf2332da7112.jpg)
![shift shaft O ring .jpg shift shaft O ring .jpg](https://www.marineengine.com/boat-forum/data/attachments/4/4328-846f85fc9f939ab44700ce46c01a5882.jpg)
Tecumseh carb manual
http://www.smallenginesuppliers.com...umseh_2-Cycle_Engines_Service_Information.pdf
http://search.ebscohost.com/
This site has free Tecumseh and Eska Manuals, Login: marshall , Password: public
http://www.certifiedpartscorp.com
Best source for Eska parts, just call them.
For parts inquiries and orders please contact CPC sales department: Phone: (608) 752-9441 Toll Free: 1-800-356-0777 Fax: (608) 752-3528 or Email: [email protected]
http://home.earthlink.net/~brixent/index.html
Good Source for Eska parts and a great model year lookup
http://gardentractorpullingtips.com/ignition.htm
Ignition Solutions for Small Engines
http://www.boatsportandtackle.com
A good supplier of Eska parts
http://www.SearsPartsDirect.com
Lookup parts and diagrams for your Ted Williams and Gamefisher outboards
http://www.searspartsdirect.com/par...86?pathTaken=partSearch&prst=0&shdMod=217-586
I was able to consolidate all of the Sears no. above 217-586 using the search function at sears, these are 1985-86 7.5-15hp
All Sears Outboards with model numbers 217.586000 and above where built by Eska Outboard in 1985 - 1986. Eska closed and stopped production in 1986.
http://www.tecumsehpower.com/
To my knowledge Certified parts corp. has acquired whats left of Tecumseh.
http://www.small-engines.com/tetorque.html
Tecumseh outboard torque values.
http://youtu.be/0W83SOfSJoQ
Retrobrad Presents! Electronics Tutorial 1 - Ohm's Law
Electronics Tutorial
http://smallengineinformation.com/?page_id=413
TROUBLESHOOTING THE OUTBOARD IGNITION SYSTEM
http://www.siliconchip.com.au/cms/A_110499/article.html
Submitted by truckintyler
http://forums.iboats.com/showthread.php?t=432264
Tommy Two Stroke, Tecumseh timing procedure for 7.5hp Eska
http://forums.iboats.com/showthread.php?t=407434
Tommy Two Stroke, Speedi-Sleeve
http://forums.iboats.com/showthread.php?t=458346&p=3095582#post3095582
Tommy Two Stroke, OMC coil update
http://groups.yahoo.com/neo/groups/Vintage_Outboards/info
Help for DIY Eska igniton related repairs, files & diagrams, this is a private DIY support group only, membership must be approved.
http://www.youtube.com/user/ohiorivercats
Ohio River Cats, Youtube Channel some Eska related videos for fun.
I highly recommend that if you have Solid State ignition issues that can't be resolved by any other means that you contact www.marineengines.com for CDI replacement or rebuild, A New CDI replacement is available for the twin cylinder Eska built , Eska , Seaco, Ted Williams and Gamefisher outboards, CDI part number 110-0958, This is a New part only and no rebuilds are available for the twin http://www.cdielectronics.com/produ...er-stator-110-0958-replaces-610958-610873/CDI
CDI does have a repair/rebuild service for the Eska single cylinder Solid State Ignition, there are no new replacement stators available for these single cylinder models , There are three models of single cylinder Eska/Sears Solid State Stators, part no. 610759, 610851 and 610906,
As always I am happy to give advice and help when I can, feel free to PM me here at www.marineengines.com
Mr Crabs.
Last edited: