Logo

convert tiller motor

jknoah

Member
Hello everyone, I have a old 8 hp tiller motor, Honda BF8 ,I think 1999 or 2000 engine.
Is it possible this one to convert a remote control motor for throttle, shift, steering,engine start ...etc ?
 
You can add throttle, shift and steering but not start. You can extend the kill switch, so you can stop it at the control. You need the adapter assembly on page 2. You will also need the cable end pivot kit, as it says.

You then need 2 throttle/cables (3300 type) and a control box. You can generally use a universal control box, but you will have to be a little creative. You will also have to be a little creative on connecting the steering.

I can not think of any document that provides a nice clear explaination to make this work. Someone on the forum may have some thoughts. i know many have done it.

Mike
 
Back
Top