Logo

raw water cooling pump removal 1999 5.7

Srgentpepr

New member
1999 volvo penta 5.7 GSI PWTRCE

okay, one of the four brass bolts holding the raw water pump together broke off. So I removed the other three and opened it up....my questions is how do I get the whole pulley asembly off of the crank shaft. its part number is 21214596
I know it would be much easier to drill out the broken bolt if I could remove the entire raw water assembly

thanks for your help
 
Re: raw water cooling pump removal

This should be your raw water pump, or very similar.
The entire # 1 piece should unbolt from the harmonic balancer.
I sure don't care for this, and if I owned one, I'd find a way to replace the double shiv, and use a Johnson Crankshaft pump instead.
Same basic volume, same basic configuration.... but certainly more serviceable.... and certainly less expensive!
20172.jpg
 
Re: raw water cooling pump removal

I have everything off except for the piece number one, do you know how to remove this piece? I dont know how it is being held on
 
Back
Top