Logo

vovlo 3.o

keith brink

New member
have replaced everything in the water circulation area. i still have a blockage somewhere. water not circulating thru the block. had zebra mussel problem but all water pumps and impeller replaced. where do i go from here.
 
Possible the little critters set up house in the water passage in the lower unit between the inlet screen and the elbow. If I knew which drive you had I could be more helpful, for example if its a 200 series, then there is a hole in the bottom of the drive under the inlet screen that is a straight shot all the way up the drive to the water elbow. A straightened coat hanger wire should be able to be s***** all the way up to the water elbow.
 
Last edited:
I have a 3.0 Litre GL Volvo Penta with the SX Drive but I don;t have Zebra Mussels in my lake pumps alot of air but not a drop of water !! any ideas thanks!!
 
Back
Top