Logo

9.8 110 merc carb float level

sparkncarl

New member
I have an old 9.8 110 serial #4084137 with a merc carb I and I want to check my float level. Can someone pop me some info on how I do this?
Appreciate it ! :)
 
Put a clear tube on the drain nipple ar the bottom of the carb, open the bowl drain screw and hold the tube up next to the carb, the fuel wull flow until it reaches the point that the float stops it. You can then see where it sits inside the carb by looking at the clear tube.
 
Back
Top