Logo
FULL SITE MENU

"O" Rings for Stern Gear Pivot.

jeez this is like pulling teeth info lost can't find or just plain not going that far back. inner transom plate like i said before should be a plate with numbers.
 
The only other plate that is attached to the Stern Gear, is on the Intermediate Housing, and that is pictured below.

The only other numbers on the actual Hull are the Mould Number that is formed in the Fibreglass, and the Chris Craft Number that is attached to the transom via pop rivets, also pictured below.

Bruce.
 
Last edited:
Back
Top