Logo
FULL SITE MENU

Tilt system on Evinrude 115HP 1978 model

A

airforce

New member
I would like some advice on ho

I would like some advice on how to take the top off my pistons to replace the seals. Any help would be greatly appreciated!!!
 
"there is a spanner wrench,and

"there is a spanner wrench,and a long cap remover w/studs on it to remove trim caps..it has been done before using a punch,however,the result is usually a messed up cap.."
 
from a brp john/evin dealer...

from a brp john/evin dealer...in their sp tools catalog....poss ebay..or u may be able to make one.
 
Back
Top