Logo
FULL SITE MENU

DT 99C oil resevoir

K

kennyg

New member
"How do you remove the plastic

"How do you remove the plastic oil tank? Removed the support bracket, but still can't free it. Reason i am removing is to check the fuel connector inside. I have to keep squeezing the primer bulb to keep it going. Any suggestions on this appreciated too!

Thanks, Ken"
 
"Thanks guys. I bought a univ

"Thanks guys. I bought a universal replacement hose/bulb, come to find out the inside diameter on the new one was 3/8", while the original was 1/4 or 5/16" - so the connectors didn't fit. Should I stick with the original size or go with 3/8 for better flow? Everything seems to be 3/8"."
 
"Stay with original, pump can

"Stay with original, pump can suck easier through the smaller diameter. Think of a straw and a drink...you can draw up into a small straw easier than bigger. You don't have to worry about capacity of flow, the engine doesn't draw much."
 
Back
Top