Logo
Results 1 to 4 of 4
  1. #1
    David Nix's Avatar
    David Nix Guest

    Default " At speed, I must keep both h

    " At speed, I must keep both hands on the wheel or it will turn hard to one side. The other side is easy to turn to and it will turn on it's own to that side if you let go. It is on a Hurricane deck boat 19 foot. It has always been that way, it's not something new. I just did not think there was anything I could do about it. "

  2. #2
    Join Date
    Nov 2005
    Location
    Posts
    424

    Default " David, The problem you ar

    " David,

    The problem you are dealing with is caused by the rotation of the prop; the trim tab on your outboard is made to combat this problem. You can adjust the trim tab so that it put's torque on the outboard in the opposite direction to help keep it straight.

    The best solution is to go with No-Feedback steering; most modern systems for outboards are this way. What No-Feedback steering does is prevent force from being transfered from the outboard to the wheel - so more or less the engine is locked in the position you leave it in, it also makes steering much easier. To upgrade you probably can just replace the helm and stick with the same cable for under $100; if the cable will not work with the new helm, the whole system is about $180 and well worth it.

    Jon "

  3. #3
    Join Date
    Feb 2001
    Location
    Central West Florida
    Posts
    15,854

    Default "David.... In addition to Jon&

    "David.... In addition to Jon's reply, to compensate for the pulling action, move the trim tab in the direction of the pulling a little at a time. Eventuially you will cancel the pulling problem out. I mention this due to the fact that some boaters confuse the function of the trim tab, and move it in the wrong direction which compounds the problem.

    Joe[img][/img]"
    We occasionally have questions. If you fail to answer, it may affect ours.

  4. #4

    Default Re: "David.... In addition to Jon&

    To be clear, my trim setting is untouched since I bought the boat 2 months ago & I guess it is not at its full limit, rather its 2 notches away, nearly full to port.

    Heres the pic:
    Click image for larger version. 

Name:	trim tab.jpg 
Views:	40 
Size:	100.9 KB 
ID:	25057

    Quote Originally Posted by joereeves View Post
    "...to compensate for the pulling action, move the trim tab in the direction of the pulling a little at a time...
    Joereeves, what you say does seem counter intuitive, though I guess I hadn't really considered all of the forces at play... & now I think I understand why you're right.

    I have some experience in aviation & what you say would counter traditional "trim" wisdom on an airplane. Lets say a jet or a twin engine airplane is out of trim and yawing to the left, you move the rudder trim surface the right to counteract that yaw. Single engines airplanes do suffer from torque steer too, though I hadn't considered my problem from that perspective before now.

    So, I guess we need to move the trim tab in same the direction as the torque steer because that creates a larger surface area for the propwash to act against to correct the torque steer, thereby pushing the motor in the opposite direction. Interesting...

    Again, I haven't touched my trim tab, because I had assumed correcting a turn to starboard required trim adjust to port & my tab is already -mostly- to port. Just like joereeves said.

    Someone needs to do a 3d fluid flow simulation & post to youtube so people can better understand this phenomenon. There isn't much info out there on how this really works. Just lots of info saying "here's your trim tab, adjust it to correct torque steer", offering no further guidance.

    Before I throw down on a hydraulic or NFB kit, I will start by adjusting my trim tab about half the distance to full starboard from its current position & will report back next time I splash the boat.

    Thanks for the help in getting my head wrapped around this issue!
    Last edited by HarborRatt; 09-21-2020 at 11:39 PM.

Similar Threads

  1. Torque for head bolts 1992 60hp johnson
    By mikeduy in forum Johnson Evinrude Outboard Archive
    Replies: 0
    Last Post: 10-20-2008, 01:31 PM
  2. 1988 Johnson 88 horse extremely difficult to steer
    By jeff_evert in forum Johnson Evinrude Outboard Archive
    Replies: 4
    Last Post: 06-09-2008, 02:32 PM
  3. 1992 Evinrude TE40 Torque spec
    By m_strawn in forum Johnson Evinrude Outboard Archive
    Replies: 1
    Last Post: 10-24-2007, 09:01 PM
  4. Still hard to steer
    By eric in forum Outboard motors archive 2000-2004
    Replies: 1
    Last Post: 08-07-2002, 04:03 PM
  5. Torque settings 1992 Evinrude 15hp
    By jordan in forum Outboard motors archive 2000-2004
    Replies: 1
    Last Post: 05-04-2002, 08:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •