Logo
FULL SITE MENU

Lifting 125 Mariner off transom

R

rick50

Member
Anybody know how to lift the m

Anybody know how to lift the motor off the transom?

The book is showing an eye bolt welded to a nut. This nut screws onto the fly wheel shaft and the power head is lifted up..Can I use the same setup to lift the motor off the transom?
 
I forgot to mention I see them

I forgot to mention I see them on ebay at around $35 or thereabouts.If you get one that takes a threaded bolt down the center it doubles as the flywheel popper
 
Do you know what thread size i

Do you know what thread size it is?

What do you mean threaded down the center? Like a gear puller?
 
"Rick I haventaclue about the

"Rick I haventaclue about the thread size
biggrin.gif
http://motors.shop.ebay.com/Boat-Parts-/26443/i.html?_nkw=flywheel+puller+&_cqr= true&_dmpt=Boat_Parts_Accessories_Gear&_nkwusc=fyywheel+puler&_rdc= have a look"
 
"I have a ,84 model 115 merc.A

"I have a ,84 model 115 merc.And it has 11/2"diameter 16 threads per inch.& yes it works like a gear puller if you use a bolt to pop off the fly wheel."
 
"Thanks again for the info, bu

"Thanks again for the info, but I found out yesterday the threads are m16 x 1.5.

Thought it was 5/8 x 18 but the bolt would not thread all the way thru, it went about 3 turns and stopped."
 
Back
Top