Logo
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2009
    Location
    Worcester Worcestershire
    Posts
    1

    Default "Hi, can anyone out there prov

    "Hi, can anyone out there provide any information on Archimedes Penta outboards? I have a 450 that I have just got started but have no technical information to service and fine tune . Also looking for any supplier of spares.

    Cliff"

  2. #2
    Join Date
    May 2007
    Location
    Inverary, Ontario, Canada - The Great White North Eh!
    Posts
    9,114

    Default "Cliff, the builder of that pa

    "Cliff, the builder of that particular line of outboards was owned off and on by Volvo over the years.

    In the 1940's, Electrolux (better known for vaccum cleaners) bought Penta from Volvo (which had already been owned a couple of times before Volvo came into the picture).

    They already produced a line of outboards called the Archimedes, which is where the name came from.

    The model 450 was manufactured between 1967-74 by Nymans Verkstader (Swedish company) who had bought out the outboard division of Electrolux in the mid 60's. At the time they also built outboards carrying the Monarch and Crescent brand names (so parts from either of those may be compatable, but I don't know since they are rather obscure/unpopular in North America).

    In 1973 Volvo bought the whole shebang back again and began marketing outboards under the Volvo Penta nametag in both Europe and North America.

    A few individuals have been looking for parts for these on occasion. I personally have contacted Volvo (Penta - North America) and they were of no help stating they were not in the outboard business and could not provide any contact for parts.

    I believe someone found parts from a source either in Sweden or Germany but the name totally escapes me at this time.

    Sorry that I can't give you much more than a history lesson...."
    Graham

    A "professional" is someone who gets paid for their work - it doesn't necessarily mean they are good at it :)

  3. #3
    Join Date
    Jan 2008
    Location
    Peacehaven, East Sussex, UK
    Posts
    13

    Default "Hi Graham, Cliff has been in

    "Hi Graham, Cliff has been in touch with me and I have given him the info he required he must have got my info off the site, both Sweden and Germany are the main sites for these engines and they still talk about them today.
    Kind regards,
    Bill."

  4. #4

    Default Re: "Hi Graham, Cliff has been in

    Archimedes Penta 80 spark problems.
    After testing everything else, I'm looking into the ignition bits under the flywheel. I see the front internal ignition coil, grounded at one end, is wired at the other end only to a 2-prong socket on the lower front of the motor. The other socket prong is wired to ground.
    What is this socket for? Do I need to make some kind of connector for it? How does this work?

  5. #5
    Join Date
    May 2011
    Location
    slough ,berkshire uk
    Posts
    155

    Default Re: Archimedes Penta outboard

    the last batch of these motors and anything Volvo penta on their outboards were 1979. after that date still plenty about but all old stock.
    last big amount of Volvo outbids went to Kuwait !!! then camebak to Europe in 1979 and got sold off.

    there is a Volvo penta outboard page on facebook that can and will give advice on these motors.
    join these guys, they love the Volvo outboards
    penta club Gumbostrand on facebook.

Similar Threads

  1. archimedes/penta 450
    By slider1525 in forum Gale Outboards
    Replies: 2
    Last Post: 08-10-2010, 12:05 PM
  2. Archimedes Penta 360
    By dasboot in forum Other Outboard Motors
    Replies: 0
    Last Post: 06-14-2009, 10:27 AM
  3. Archimedes Penta outboard
    By archimedes in forum Archive 2003-2009
    Replies: 1
    Last Post: 04-02-2008, 05:03 AM
  4. Archimedes Penta 450
    By aberdeennut in forum Volvo Penta Gas Archive
    Replies: 0
    Last Post: 01-18-2008, 10:13 AM
  5. Archimedes penta 25 hp
    By killertrance in forum Archive 2003-2009
    Replies: 0
    Last Post: 10-02-2006, 01:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •