Logo

ALPHA ONE WONT TRIM UP

mcs59

New member
"I have a 1996 Bayliner 2250 S

"I have a 1996 Bayliner 2250 SS with a 5.7 and alpha one outdrive. Now that the overheating issue is resolved, a new issue has developed. When I press the switch to trim the outdrive up, nothing happens. The outdrive will trim down with switch and up if I use the trailer switch. I thought I saw this problem on a prior discussion, but cannt seem to find it."
 
"Your trim limit switch is lik

"Your trim limit switch is likely at fault. There is a very good comprehensive post for diagnosis and repair of trim problems, I think by Guy Gasper. Search and print it off."
 
"If you can read this schemati

"If you can read this schematic I made it is for a older style trim system but the basic trim switch wiring is the same. That is what you are looking for. The switch is adjustable and may be the issue. If not then you have a wiring issue.

Hope it helps.



290597.jpg
"
 
I found the article you are ta

I found the article you are talking about. I should be able to diagnosis my problem based on Guy's post. Thanks for responding.
 
Back
Top