MarineEngine.com - Your online store for all types of marine engines and boat parts.
PHONE ORDERS
Monday - Friday
9:00 AM - 5:00 PM EST
Click for TOLL-FREE Number
Online Checkout
Special $9.95 Flat Rate Shipping
(800) 209-9624 | Home | Contact | Shipping | Returns | Cart View your shopping cart.
Part Number Search
Shop by engine/drive part number.
Original & matching parts for sale.
Manuals & Accessories
Shop by description, item number
or manufacturer's model number.
Boat Repair Forum Boat Repair Forum   Boat Video Gallery Video Gallery
   
Click for Bukh manuals!
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2009
    Location
    Auckland New Zealand
    Posts
    3

    Default "My DV20 appears to be steamin

    "My DV20 appears to be steaming a little too much, there is enough water flow and the engine starts easily and runs well. Oli looks ok at first glances. How can I test?
    Steve."

  2. #2
    Join Date
    Aug 2009
    Location
    Hobart, Tasmania, Australia
    Posts
    114

    Default "G'day Kiwi, O

    "G'day Kiwi,
    Oil should be pure black water contamination will show as grey tinge. Dv20s have a habit of getting scale build up in head to manifold area this can sometimes be fixed by filling engine with Vinigar let soak for 24hs then flush check overboard for results,apart from previous, start at sea cock and check thru system for any restrictions pay particuliar attention to impeller,thermostat [working] and exh elbow injection point.If no joy exh manifold will have to come off for clean out. Hope this helps. Shakey."

  3. #3
    Join Date
    Aug 2009
    Location
    Auckland New Zealand
    Posts
    3

    Default "Thanks Doug, Oil looks ok b

    "Thanks Doug,
    Oil looks ok but will recheck. I have done the phosforic acid reverse flush and a lot of much came out. Water flow looks normal, but could be slightly low. But plenty. Sort of steams from the get go so that is why I am a bit woried as it looks like "burnt" water. I am no diesel mac but quite technical savvy."

  4. #4

    Default Re: How to test for blown head gasket

    Steam in the head or around the valves will pit your head and valve seats killing your engine.

Similar Threads

  1. Not sure how to proceed. Blown head gasket, head or worse...
    By Philster in forum Mercruiser Sterndrive Forum
    Replies: 8
    Last Post: 08-17-2010, 06:08 PM
  2. Merc 30 Blown Head Gasket
    By mjennings in forum Mercruiser Sterndrive Archive
    Replies: 18
    Last Post: 09-10-2008, 11:33 PM
  3. Blown Head Gasket
    By ldell in forum OMC Sterndrive and Inboard Archive
    Replies: 6
    Last Post: 07-07-2008, 11:45 PM
  4. Blown head gasket
    By Brandon Wojcik in forum Volvo Penta Gas Archive
    Replies: 8
    Last Post: 05-17-2007, 12:40 PM
  5. Blown head gasket
    By Will C. in forum OMC Sterndrive and Inboard Archive
    Replies: 4
    Last Post: 04-27-2006, 06:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •