Logo
Results 1 to 2 of 2
  1. #1

    Default I have a 86 Westerbeke fwc 8kw

    I have a 86 Westerbeke fwc 8kwg Gas genset that I lazer temped and notice the exhaust elbow got up to 400-degrees??? (just past the asbestos sleeve) The exhaust manifold stayed at 160 and heat exchanger 130. I have never thought to laser temp it in the past...but this seems excessively hot. plenty of waterflow out the wet exhaust. (recently rebuilt raw water pump) Connected to the outside of the elbow is the temp themorstat which is suppose to shut down above 250. So I am confused. Thoughts anyone

  2. #2
    Join Date
    Aug 2009
    Location
    Hobart, Tasmania, Australia
    Posts
    114

    Default "Hi richard, Iam no

    "Hi richard,
    Iam not familiar with the 8kwg, but if you are talking obout the uncooled section of exhaust pipe between the manifold end and the water injection site, 400f is quite possible dependant on gen loading .Lagging may be a bit short. Just my thoughts,Shakey."

Similar Threads

  1. 470 exhaust elbow gasket
    By txny13 in forum Mercruiser Sterndrive Forum
    Replies: 1
    Last Post: 07-15-2010, 11:31 PM
  2. exhaust elbow
    By emuman in forum Volvo Penta Gas Engine Forum
    Replies: 0
    Last Post: 03-27-2010, 07:41 PM
  3. Hot exhaust elbow
    By rcaponeg in forum Mercruiser Sterndrive Archive
    Replies: 1
    Last Post: 06-03-2007, 11:14 PM
  4. 19831995 Chrysler 440 exhaust manifold exhaust elbow
    By cassifree in forum Chrysler Inboard and Sterndrive Archive
    Replies: 2
    Last Post: 05-07-2006, 08:04 PM
  5. Need exhaust elbow
    By Candy Hendrix in forum Archive 2002-2006
    Replies: 1
    Last Post: 10-30-2001, 10:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •