Logo
Click for Volvo Penta parts and manuals!
Results 1 to 8 of 8
  1. #1
    Join Date
    Aug 2009
    Location
    Oslo Norway
    Posts
    5

    Default "Hello all. I need help on

    "Hello all.

    I need help on our VP 5.7GSI, here i go explain it all:

    The engine starts fine, and the engine do not overheat. But the risers get so warm i cant touch them, the right one is worst.
    1. I have new impeller
    2. Have taken riser off, and it looked good. No rust at all.
    3. Water comes out the impeller housing when i took it off and tried with muffs on the leg.

    Can something be blocking riser? the manifold dont get warm, just the risers....So im out of ideas, and the Marina i use dont have time to help for 4 weeks. Then our vacation is over!!

    Can someone please help me to get some new ideas about the problem.

    Best Regards
    Tom"

  2. #2
    Join Date
    Feb 2006
    Location
    Ladysmith, BC, Canada
    Posts
    5,862

    Default Did you check the thermostat h

    Did you check the thermostat housing and the hose?
    [URL]http://www.grandmaraismichigan.com/Recreation/fisherman.gif[/URL]

  3. #3
    Join Date
    Aug 2009
    Location
    Oslo Norway
    Posts
    5

    Default "I have tried to locate it, bu

    "I have tried to locate it, but as i am no wonderboy when it comes to engines-)
    I did not find it, i tried look for some schematics on internet. But no luck on the 5.7 GSI 2000mod engine.
    Where is the housing located, and the hose?

    Tnx for answer

    regards Tom"

  4. #4
    Join Date
    Feb 2006
    Location
    Ladysmith, BC, Canada
    Posts
    5,862

    Default "Check this [url=""]http://

    [URL]http://www.grandmaraismichigan.com/Recreation/fisherman.gif[/URL]

  5. #5
    Join Date
    Aug 2009
    Location
    Oslo Norway
    Posts
    5

    Default "I cant join page, since i am

    "I cant join page, since i am on ip from Europe. Strange..."

  6. #6
    Join Date
    Feb 2006
    Location
    Ladysmith, BC, Canada
    Posts
    5,862

    Default "You can use a proxy server to

    "You can use a proxy server to access the page from Europe, but here is the schematic. The thermostat housing is part 35.

    "
    [URL]http://www.grandmaraismichigan.com/Recreation/fisherman.gif[/URL]

  7. #7
    Join Date
    Aug 2009
    Location
    Oslo Norway
    Posts
    5

    Default "Thanks, very nice to get fast

    "Thanks, very nice to get fast help-)

    Best Regards
    Thomas"

  8. #8
    Join Date
    Aug 2009
    Location
    Oslo Norway
    Posts
    5

    Default "I took off the thermo housing

    "I took off the thermo housing, and i found nothing. It did not have a thermostat, and seems its not had it for a long time. Was rust colour there, but no rust bits. So that means i get water to the impeller housing, but i do not get water trough the thermostat housing. What can be the problem then?"

Similar Threads

  1. Volvo 57gsi TBI ice
    By garryuk in forum Volvo Penta Gas Archive
    Replies: 7
    Last Post: 01-16-2009, 07:31 AM
  2. Circulation pump on 57gsi
    By bdm in forum Volvo Penta Gas Archive
    Replies: 5
    Last Post: 06-14-2008, 08:47 PM
  3. Volvo 57gsi
    By paul_h in forum Volvo Penta Gas Archive
    Replies: 0
    Last Post: 11-06-2007, 07:43 PM
  4. Manifolds Riser Spacers Riser Elbows
    By schachtvestcorcom in forum Crusader Marine Archive
    Replies: 1
    Last Post: 09-19-2007, 05:27 PM
  5. Volvo 1999 57gsi
    By nurseling in forum Volvo Penta Gas Archive
    Replies: 17
    Last Post: 05-12-2006, 09:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •