Logo

AQ130A Engine hesitation

nonanajo

New member
Our local dealer recommended I

Our local dealer recommended ISO-Heet to eliminate my engine from choking. After pouring it into the tank and filling it with gas I took it to the lake and now the engine hesitates when going full throttle. After I run it for approx 5 min at 2000 rpm it slowly goes up and finally reaches 4100 rpm. Prior to this it would go to 4500 rpm and up to 30 mph. Now it stays at 4100 rpm and 25 mph. Any ideas? All help is appreciated.
 
"It may be time to clean the c

"It may be time to clean the carb bowls and jets, the fine fuel filters inside the carbs, the filter inside the fuel pump, and to check the accelerator pump."
 
Thanks EL. Was wondering if th

Thanks EL. Was wondering if there is any documentation on how to perform the recommended steps. Thanks.
 
"Yes. You can either buy the O

"Yes. You can either buy the OEM manual, or just the Seloc or Clymer manuals. Personally, I would recommend Seloc."
 
Back
Top