Logo

8BTDA not starting

jntx36

New member
"Any info would be greatly app

"Any info would be greatly appreciaated, I changed all filters,bled the fuel system at the injectors,glow plugs are working, but am stil unable to get it to start."
 
Verify the fuel soleniod and f

Verify the fuel soleniod and fuel pump are operating with the pre-heat switch depressed. Over cranking with a water lift muffler can cause water injestion. Close the thru-hull valve if you continue to crank on the engine to try and get it started. Don't forget to open valve as soon as the engine starts.
 
Back
Top