Logo

Pulling motor

redsnapper386

Regular Contributor
"guy's, i am pulling out m

"guy's, i am pulling out my 350,what should i replace while the motor is out.1986,there has to be some other part's that could be bad.any poiter's,i would appreciate.thank's."
 
"Why is it being pulled?

Pu


"Why is it being pulled?

Pull the starter and have it refurbished. If the oil pan is rusted take care of the rust. Install a remote oil drain hose to the pan if desired. Install a remote oil filter if desired. Examine the engine coupler and replace it if the splines have lost their square cut; rounded or pointed. Examine the exhaust shutters and replace if needed. Remove the exhaust manifolds, risers and elbows and have them cleaned and pressure tested at a radiator shop; replace w/OE parts if questionable. Remove the circulating pump and flush out the rust and scale from the cooling jacket; replace pump if questionable. Replace valve cover gaskets if leakiing. Clean the engine of grime and touch up the paint."
 
Back
Top