Logo

Another exhaust riser question 38L 229

crustycritter

New member
"As some of you may know, find

"As some of you may know, finding parts for the 165 hp 229 V6 Crusader can be a challenge. After smoking an exhaust hose last week, it is finally time to replace the risers and elbows. When Looking for the risers and elbows I only see the one listed for the V8 that look very similar with a 3" outlet. Does anyone know if these risers and elbows will work for the V6 as well.

Thanks."
 
"Most of the 'older' 3

"Most of the 'older' 3" outlet elbows interchange across all engines with the 'log style' manifolds.

If you have a specific part number, best to call MFG's tech support department and confirm before you order."
 
I too have an older 229ci. Tho

I too have an older 229ci. Those 3" elbows for the small block chevy worked fine when I swapped mine. Several years later I had to replace the manifolds as well and there are no log style options available anymore for that engine so I went with OSCO center rise manifolds/elbows.
 
Back
Top