Logo
FULL SITE MENU

Crusader raw water pump belt number

E

eggharborrick

Contributing Member
changing old belts.1985 270 cr

changing old belts.1985 270 crusaders.got the alt belts ok. the water pump belts are dayco number 9630751065 as near as my older eyes can see but i'm being told thats a bad number. anyone have any thoughts??
 
Take the old belt to the local

Take the old belt to the local Napa and see what they can tell when they mesure them.
 
my big blocks take at 17325 &#

my big blocks take at 17325 (1/2 shorter than original) - don't know if the small blocks are the same. Paul's suggestion will get you dead on unless its worn a bit.
 
"sorry,my error.i got the raw

"sorry,my error.i got the raw water pump belts. they were a dayco 17320. its the alternator belts they told me had the bad number. the number on them is 9630751065. thanks."
 
should be 15/32nds wide - firs

should be 15/32nds wide - first two digits 15. The length should be between 43"-45". So the number should be something like: 15430....15435...14450 - somewhere in that range.
 
Back
Top