Logo

Honda BF90A Silencer Removal

eastfork

New member
How do you remove the silencer

How do you remove the silencer?
I've removed the two bolts but it still remains attached. Are there hidden bolts?
 
"I am having the same problem.

"I am having the same problem. There are 3 bolts that i found. One is on the bottom. Even with three removed, something is still holding it in. Is there something i'm missing?"
 
the silencer can't be remo

the silencer can't be removed without taking the carbs and intake manifold with it
there is a bolt at the back up against the engine
 
Is intake manifold removal dif

Is intake manifold removal difficult? Also can i re-use gaskets on intake manifold and carbs or do i need to replace them all?
 
"no the intake manifold remova

"no the intake manifold removal is not difficult
and no you can not reuse gasket on the manifold or carbs at least I couldn't

I take it you are doing a carb rebuild, if so
you need to get a shop manual

and you need a vaccum gauge to sync the carbs after your done"
 
"Update : I got everything rem

"Update : I got everything removed, took the carbs apart and cleaned them (counting number of turns on idle mixture screw) and re-assembled. Runs better than ever. Thanks for all your input and help blackfish."
 
Back
Top