I have 3 Johnson outboard motors. Need to find out the gas/oil mixture ratio. Thanks for the help. Here's the info:
1) 1977 35HP Model 35RL77H
2) 1983 35HP Model J35RLCTS
3) 1990 30HP Model J30RLESS
I have 3 Johnson outboard motors. Need to find out the gas/oil mixture ratio. Thanks for the help. Here's the info:
1) 1977 35HP Model 35RL77H
2) 1983 35HP Model J35RLCTS
3) 1990 30HP Model J30RLESS
I believe all outboards are 50:1
All three of those run on 50:1
Bill H PTC USN Ret
A manual is a cheap investment.
How about the oil ratio for a 1973 135 hp motor?
"All Johnson and Evinrude outboards use 50:1 since 1964 (including those supplied in the 1980s as using 100:1)
See http://www.evinrude.com/en-US/About....il.Fuel.htm#Q1"
i got 1959 jhonson 10hp sea horse model QD-20 what is the fuel and oil mixture and spark plug can anyone help thank phillip
See the link I gave above for the fuel mix.
J4C plugs gapped at 0.030" but go to J6C if fouling is a problem ('52- '58 used J6C and an oilier mix!)
TCW:II Or [email protected] A ratio of 50:1 Thats equal to one pint 16oz to each 6 Gallons of PREMIUM FUEL !
"A ratio of 50:1"
But not for a 1959 model. 24:1 according to the link. That's 1 pint in 3 gallons.
I'm curious why the 100/1 motors have been switched to 50/1? I have an 88 25hp and the factory lit. all said 100. Now it's 50?? why?
Many powerheads blew due to that mixture. Obvious to many of us that a OMC goof took place. Need I say more?
We occasionally have questions. If you fail to answer, it may affect ours.
I have a johnson super seahorse electric model RDSL-29E serial # J2803935 could someone tell me what year it is and where i could find a egnition wiring digram thanks
"www.outboardbooks.com ... Even though these are for buying a manual if you know your model number you can search it and find the year of your engine."