Logo
Click for Honda Manuals, Parts and Model Guides!
Results 1 to 3 of 3
  1. #1

    Default Ok I was planned off running u

    Ok I was planned off running up a creek @ 5300 rpm wto for my motor and boat.. and hit a stump under water. after looking at prop. nothing bent or warped looks good.But now it I throggle wide open rpms go up above 6200rpms and I back it down to mid 5500 rpm but can not get on plane boats alot slower and I have never got 6200 rpm ..
    After trailering boat pulled prop to check hub to check I can't see where hub spunnn on prop.
    SO what should I check next????

  2. #2

    Default "Well not the hub marked it NO

    "Well not the hub marked it NO SLIPPING !!! I guess I hit hard enough to change the angle on the alum. prop and that causeing more rpm's . plus Placed it in gear , turn prop with foot and turned motor or pistons over in motor had great compression SO I got a good shaft all way to the prop so its got to be prop. angle changed on inpack with stump or log but all the blades look the same and nothing looks bent!!!! so i may be going stainless steel this week"

  3. #3
    Join Date
    Sep 2008
    Location
    El Cajon, Ca., USA
    Posts
    107

    Default You need to be very careful wi

    You need to be very careful with that stainless prop in areas where they can hit something. The fact that you had an aluminum prop may have saved your lower end or crank shaft.

Similar Threads

  1. Honda 225 losing RPMs
    By slopoke in forum Honda Outboard Forum
    Replies: 8
    Last Post: 01-20-2010, 08:12 PM
  2. Honda 225 stalls in high rpms 4200
    By nikxat in forum Honda Outboard Archive
    Replies: 7
    Last Post: 05-20-2009, 02:16 PM
  3. 25hp 4 stroke Laboring at High rpms
    By bay2sav in forum Nissan Tohatsu Outboard Archive
    Replies: 3
    Last Post: 10-13-2008, 08:39 AM
  4. Replies: 6
    Last Post: 06-13-2008, 10:39 AM
  5. Brand new honda 8hp howls at certain RPMs
    By terry123 in forum Honda Outboard Archive
    Replies: 1
    Last Post: 08-09-2007, 12:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •