Logo

New member needs help

jdcavanee

New member
I have a 1995 Glastron ssv249

I have a 1995 Glastron ssv249 with a 7.4 merc Brovo 1
Long and short it got hot when it was idling I shut it off and white smoke came frim the engine and later discovered that the sleeves on the exuast had melted not all the way they are still intack but the hose that goes out the transon to the outdrive is torn and needs to be replaced.
Any input would be great and the possible cause.
I think it may be the impeller but im not sure how to change it.
Thanks in advace for your help.
Jason
 
"easiest way is remove the pum

"easiest way is remove the pump from the boat and disassemble on a bench. hardest part is removing the hoses. and if the boat is in the water, plug the hose from the intake. it could sink the boat."
 
OK pulled the batteries and lo

OK pulled the batteries and looked under engine and found that the hose that comes from the thermostate to the exustmanifold it has a elbow that has melted or froze on the starboard side. I will pull the water pump but first I will call the marina that winterized it. I'm sure I won't get anything from them other than to bring it down.
Please advise
thank you very much for the input.
 
Back
Top