Logo

Adjusting valves

97rinker

New member
I am trying to adjust valves o

I am trying to adjust valves ona 1997 4.3 v-6 with a balance shaft and roller lifters. Manual says to torque to 20 foot pounds but it seems too tight. Manual does not mention any order torque valves. Is there a certain sequence to torque valves or different way of adjusting valves on this engine? THANKS FOR ALL THE HELP.
 
I would read it as setting eac

I would read it as setting each cylinder with both valves closed and torquing to 20ft/lbs
 
Back
Top