mictat2214
Contributing Member
"Drilled & tapped my new 1
"Drilled & tapped my new 1409 Edelbrock to accept PVC hose. Used a 17/64 drill bit & a 1/8 NPT tap. A very, very straightforward & simple procedure. I have tried to attach some pix that I hope will help others in the future. Hope they are readable."
"Drilled & tapped my new 1409 Edelbrock to accept PVC hose. Used a 17/64 drill bit & a 1/8 NPT tap. A very, very straightforward & simple procedure. I have tried to attach some pix that I hope will help others in the future. Hope they are readable."