Logo

08 Tohatsu 18hp

olmo40

Regular Contributor
"The throttle on our 18hp Toha

"The throttle on our 18hp Tohatsu has bound up ?.After pulling everything apart it apperas the piece that is sticking is the telfon cam which the throttle rod passes into the back of ,this is the piece which stays attached to the motor when the tiller is removed any ideas on how to remove this bit ?"
 
As this would be covered under

As this would be covered under warranty I would urge you to stop working on it yourself. Just run it by your closest authorized dealer.
 
"We are 3 hrs away on holidays

"We are 3 hrs away on holidays ,it seems the cam ? is seized cant see how to take it out ,motor is brand new ."
 
"Thanks for your reply.

I s


"Thanks for your reply.

I slid the cam out of the housing and it was a real tight fit ,IE binding up ,i gave it a light sand re greased and re assembled,all is good.
My concern was there was a grub screw holding the arm or part on which i couldnt see.
happy.gif
"
 
Back
Top