Logo

92 evinrude 6hp waterpump

blueboat1

New member
"Didnt notice it stopped peein

"Didnt notice it stopped peeing till it was hot enough to melt the plastic insert fitting off the rubber hose that goes into motor. (paddeled back) Must have killed it in time but boy it was hot. Next day it started but not peeing, got bubbles out of the intake by prop. Is impeller the only thing I replace? I only see the impeller listed in parts lists. Also is that something I can do myself or should it be shop bound? Any suggestions are greatly appreciated, thanks..."
 
you may want to look at an exp

you may want to look at an exploded view of that lower unit to see if there are other parts--some pumps have a gasket under the plate that the impeller sits on and there is likely to be a grommet that holds the water tube in the pump--dont know much about 92's but the repair generally involves removing the lower unit--different models of motors have different ways of doing this--
 
Back
Top