Logo
FULL SITE MENU

Lower unit removal

J

jchris1062

Member
I have an omc 800 drive. I hav

I have an omc 800 drive. I have removed it from the boat. I am trying to seperate the lower from the upper. I have removed the two bolts from each side and the center bolt. What else is needed so i
can seperate the two. Thanks
 
Drive is off the boat as well

Drive is off the boat as well as the shift cable pulled out of the transom!
Unscrew the 5 screws around the top cover and take the cover off.
Lift out the upper unit!
Take out the 4 screws holding the upper unit outer housing and take off the housing.
What more?
 
take off the fin (trim&#41

take off the fin (trim) thing on the cavitation plate and there is another bolt under it.
 
Back
Top