Logo
FULL SITE MENU

Kad32 compressor

T

tommy mac

Guest
i just fitted new pully and cl

i just fitted new pully and clutch on compressor and when i turn on isolater switch the clutch clicks and when i start engine the compressor is on constantly anyone any ideas please
 
there is a control module in t

there is a control module in the electric box. it contols the negative supply to the clutch.the positive supply comes from the starter motor and is live as soon as the battery switch is on.the negative is switched on/off by the control module.sounds like the control module or short to negative on the harness from the clutch.diconnect control module and check betweeen pins S1 AND 31- on the module.should be open circuit.if not replace module.old clutch may have damage relay contacts in module
 
Back
Top