followingsea
Regular Contributor
A quick follow-up on yesterday
A quick follow-up on yesterday's discussion. (Pertronix installed as per your guidance yesterday). Tested the coil--here's the results:
I get nearly Zero Ohms (about .2 Ohms) on the Primary side. Red lead to (+) and Black lead to (-) with all leads detached--just a bare coil.
I get 10 Ohms on the Secondary side (All leads detached. Red lead to + on coil and Black lead to center).
I double checked with my spare coil. Got about 9.5 Ohms on the Secondary and zero ohms on the Primary side.
What's going on? I thought I needed around 3+ Ohms on the primary side to make the Pertronix work?
A quick follow-up on yesterday's discussion. (Pertronix installed as per your guidance yesterday). Tested the coil--here's the results:
I get nearly Zero Ohms (about .2 Ohms) on the Primary side. Red lead to (+) and Black lead to (-) with all leads detached--just a bare coil.
I get 10 Ohms on the Secondary side (All leads detached. Red lead to + on coil and Black lead to center).
I double checked with my spare coil. Got about 9.5 Ohms on the Secondary and zero ohms on the Primary side.
What's going on? I thought I needed around 3+ Ohms on the primary side to make the Pertronix work?