Logo

Water Pump Part Info Needed

taffkid

Member
Greetings. I have a 1965 Evinr

Greetings. I have a 1965 Evinrude 33552. The engine overheated and I pulled the lower unit to check the impeller. The impeller is getting replaced but the problem was in a small rubber gasket that fits inside the top of the impeller housing water outlet and provides a seal between the outlet and the water pipe up to the powerhead.

The gasket split near the bottom and a piece of it blocked the waterflow. I need to identify this part by name or part number. I can't find any replacements for it for my engine model.

Your help is appreciated.
 
"You guys are awesome. I need

"You guys are awesome. I need to confirm that Sierra 18-3006 is the correct impeller. Also, I can find Sierra 18-3329 water tube grommet locally. Is this operationally different than 18-3332? The local shop says the one they have is for Evinrude 9.9-35 HP but it is more curvy. Will it work? (I ordered the manuals for this engine so I won't have to ask for a part number again


Thanks again."
 
Back
Top