Logo

Need design and delivery of steam propulsion

  • Thread starter Jim Hartvig Andersen
  • Start date
J

Jim Hartvig Andersen

Guest
"As a consultant for A. Walste

"As a consultant for A. Walsteds Baadeværft A/S (http//:www.walsted.dk) we are presently assisting on putting together a bid for a 17.6*4.9 m
Paddle Steamer.

What we are looking for is someone able to design, build and deliver the complete propulsion system. The paddle wheels will be built here in Denmark, but we need:

Boiler
Main engines
Auxillary engine
Condensers
Pumps
Piping and instruments

(as described in the attached extract from the designers specification) built and tested as a complete and functioning system.

We have only had a short time to study the details (steam engines is a new ?irst?for us), but the numbers make sense from a basic engineering and thermodynamic point of view. We cannot get additional information from the designers of the vessel, but the system has apparently been specified by someone with good knowledge of steam
propulsion.

In case you are not interested we would appreciate your comments other potential suppliers.

Looking forward to your early reply.

Very Truly Yours,
Jim Hartvig Andersen

Hytek Marine
Postboks 34
DK-2930 Klampenborg
--------------------------------
tel : +45-39630977
fax : +45-39630977
web : http://www.hytek-marine.dk

<!-Attachment-!><CENTER>
</CENTER><!-/Attachment-!>"
 
Back
Top