Logo
Results 1 to 5 of 5

Thread: Clinton 5 hp

  1. #1
    Join Date
    May 2008
    Location
    pennsville, new jersey, U.S.
    Posts
    3

    Default I just received a 5 hp k500310

    I just received a 5 hp k5003108c made by clinton engines corp. The problem is no spark . how do you remove the cover to the coil wire.I removed the bolts and sprayed the shaft with wd40 but was afraid to applied to much pressure to the cover

  2. #2
    Join Date
    May 2007
    Location
    Inverary, Ontario, Canada - The Great White North Eh!
    Posts
    9,114

    Default Might be a little seized from

    Might be a little seized from sitting - a flywheel puller or even a steering wheel puller (if it will fit) will make the job easy.

    Just don't try to "pry it" off. It needs equal pressure on both sides or you could break something...
    Graham

    A "professional" is someone who gets paid for their work - it doesn't necessarily mean they are good at it :)

  3. #3
    Join Date
    Jan 2008
    Location
    black creek , ga,
    Posts
    180

    Default tap it gently with a piece of

    tap it gently with a piece of wood and a mallet and it should losen from the key way and pop up. tap it on the flywheel nut.
    Every day is a new day.....GO FISHIN

    Scott

  4. #4
    Join Date
    May 2008
    Location
    pennsville, new jersey, U.S.
    Posts
    3

    Default Thanks for the tips .I removed

    Thanks for the tips .I removed the flywheel and cleaned it and checked the spark plug wire seems to be ok .Checked the coil with a ohm meter I have continuity. Put everything back together and still no spark.Where can I buy a condenser and coil if needed.I'll start with the condenser first.

  5. #5
    Join Date
    May 2008
    Location
    pennsville, new jersey, U.S.
    Posts
    3

    Default I HAVE A CLINTON 5HP MOTOR I H

    I HAVE A CLINTON 5HP MOTOR I HAVE GOOD SPARK BUT SHE WON'T TURN OVER. SPARK PLUG IS GETTING WET TO MUCH FUEL . WHAT WOULD THE SETTINGS BE ON THE CARB. 3 SET SCREWS ONE ON TOP ONE ON THE SIDE AND ONE ON THE BOTTOM OF THE BOWL PLEASE HELP

Similar Threads

  1. I have a clinton 500 and know nothing
    By brian21 in forum Archive 2003-2009
    Replies: 0
    Last Post: 04-25-2008, 09:06 PM
  2. Clinton 500
    By fishingbear in forum Johnson Evinrude Outboard Archive
    Replies: 5
    Last Post: 03-04-2008, 09:22 AM
  3. Clinton 500
    By fishingbear in forum Archive 2003-2009
    Replies: 1
    Last Post: 03-03-2008, 03:09 PM
  4. J9 Clinton
    By catfisher in forum Archive 2003-2009
    Replies: 2
    Last Post: 02-10-2008, 04:13 PM
  5. Clinton j9
    By grove in forum Archive 2003-2009
    Replies: 1
    Last Post: 07-20-2007, 07:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •