Logo
FULL SITE MENU

454 XLI TBI Fuel Flow Meter

C

carver37aft

New member
Hi i would like to know wicth

Hi i would like to know wicth model i can install
and if it install on fuel line or connect to the
ECM via the comm link ?

1996 Carver Twin 454's XLI TBI
 
I think a floscan is probably

I think a floscan is probably one of the best units available. It depends onw whether you have return fuel going to the tank from the injection or not. If uou have the return fuel vs the returnless system you will have to use two sensors - one for fuel flowing from the tank and also one in the return line. I have just installed one of a return type system. It was a 5800 type system that just gives fuel flow and a totalizer. You can spend a lot more and get mpg etc with a link to the gps.
 
I will check the flowscan and

I will check the flowscan and do you know one model you can plug with comm link of the engine because i know you can have data for GPH.

Thank

Marc.
 
Back
Top