Results 1 to 4 of 4
  1. #1
    clay lindsey's Avatar
    clay lindsey Guest

    Default I have twin 1995 Evinrude 225

    I have twin 1995 Evinrude 225 HP motors. One is counter rotating.Do they need to be toed in or out for proper tracking ?

  2. #2
    Join Date
    Nov 2002
    Mullica Hill, New Jersey, United States

    Default "Clay, On an outboard appli


    On an outboard application the only purpose of tow in or out would be to keep any play in the tie bar from chattering. The offset adjustment will keep slight pressure on the steering linkage and keep it tight. I wouldn't go more than 1/2".

    Good luck

  3. #3
    sleeper's Avatar
    sleeper Guest

    Default "Strongly recommend buying the

    "Strongly recommend buying the factory manual. It tells you all the particulars about set-up, and toe in & out. The marina that set mine up didn't know what they were doing."

  4. #4
    Join Date
    Sep 2003
    New Tripoli, PA, USA!

    Default "Slight toe IN is used on inbo

    "Slight toe IN is used on inboards with rudders, if that's any help.


Similar Threads

  1. Verification of cutting inout problem
    By rusirius in forum Johnson Evinrude Outboard Archive
    Replies: 22
    Last Post: 04-25-2009, 10:53 PM
  2. Trim inout
    By starcraft1 in forum Mercruiser Sterndrive Archive
    Replies: 1
    Last Post: 08-20-2007, 01:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts