"Refer back to my post on 11-1
"Refer back to my post on 11-13-07 about no juice at ignition switch. The reason my strbrd engine would not start is because the 90 amp fuse on the starter solenoid had failed. It failed, as I found out later, because a small wire coming from the altenator had frayed and was shorting against the dip stick tube!! Fixed the wire and put on new fuse and engine starts!!. Thanks to all for your help."
"Refer back to my post on 11-13-07 about no juice at ignition switch. The reason my strbrd engine would not start is because the 90 amp fuse on the starter solenoid had failed. It failed, as I found out later, because a small wire coming from the altenator had frayed and was shorting against the dip stick tube!! Fixed the wire and put on new fuse and engine starts!!. Thanks to all for your help."