Logo
FULL SITE MENU

Trim n Tilt On 1977 85hp Johnson

C

chuck6121

Member
hello agian The ram rods &#40

hello agian The ram rods (or so I call them) on the trim n tilt are leaking fluid from the top can these be rebulit? and what is the name of the parts I'm looking for ? The piston (I call it) And the part that the spaner wrench fits on at the top. thanks chuck
 
"that would be the end caps...

"that would be the end caps....there is a big o ring,a small o ring,and a neoprene wiper that goes on each cap..u may be able to make a spanner,but i have seen many caps ruined do to using a punch.........but,u might get lucky.
387586----is what u need----- O ring package"
 
I made a spanner by taking a p

I made a spanner by taking a piece of 1/8" and grinding a slot on the long side near the end just big enought to clear the rod and drilled two holes one either side of the slot to insert roll pins big enough to just fit in the holes.
 
Back
Top