Logo

Walk Thru Windshield struts

tboltmike

Regular Contributor
There are two turnbuckle type

There are two turnbuckle type struts supporting the ends of the windshield at the walk thru. They are used to adjust the fit of the hinged section.

I cannot find these in my searches. I'm looking for leads to find a pair of these. The adjust in the 10 to 12 inch range.
Thanks for any leads.
 
"Bill and Andrew,
Thanks for


"Bill and Andrew,
Thanks for the leads. the ones Bill referenced more closely resembles what I have with the exception that it appears that these do not adjust. These are to support the end stationary part of the windshield at the walk thru section. My struts have a center hex aluminum tube threaded left hand on one end and right hand on the other. All threads are screwed into each end and there is a ball on the other end of the all threads. The balls engage socket fixtures. One on the window frame the other on the dash."
 
Back
Top