Logo
FULL SITE MENU

Search results

  1. J

    Starter pinion change

    Can I change the starter pinion on a 1966 Evinrude 6 HP outboard without having to take off whole unit. Looks like I can just take out pin, slide gear off and replace. Anyone know for sure. This is the old style with the rope wrapped around the starter. All I can find is showing take...
  2. J

    1988 force 50 hp telltale add on

    I added a telltale on my 88 force 50 hp. I remove a small bolt at top just before the thermostat.. ran a hose to a small insert in motor housing. It sprays really well and adds a degree of comfort. I replaced a long non existent stat that a boat mech told wasn't needed anyway...I find he was...
  3. J

    1988 force 50 hp telltale add on

    I added a telltale on my 88 force 50 hp. I remove a small bolt at top just before the thermostat.. ran a hose to a small insert in motor housing. It sprays really well and adds a degree of comfort. I replaced a long non existent stat that a boat mech told wasn't needed anyway...I find he was...
  4. J

    1969 20 hp johnson question

    Just started after setting several years. Put in new thermostat...water pump assembly...and lower end lube. Old lube was fine with no evidence of water so I assumed seals were good. When started seemed to water good but a lot of water coming front front of motor just above the lower unit...
  5. J

    1969 20 hp johnson question

    Have a pic attached concerning "holes" in casing. I have always assumed they were for water to cool the baffles of the lower unit casing. A little concerned about some oil seepage from one and depth of another. Just changed water pump housing and all. No water in lower unit lube. This motor...
  6. J

    Any difference in motors

    Working on two 1969 20 HP Johnson motors. Seem identical but one is a MD21 and the other is 20R69D.. is there any difference I these motors.
  7. J

    1967 20 horse johnson throttle linkage

    NEED help repairing throttle linkage on my motor. Help on replacing plastic shear pin in the linkage going up into the motor....and placement of pin in handle around the spring. Have tried posting more in depth but keeps failing to post. If his is a success I will be more detailed in future post.
Back
Top