Logo
FULL SITE MENU

Search results

  1. C

    Oil leak 250

    One of my reletively new 250s with about 80 hours has developed an oil leak, and I am hoping some one can give me some guidence until the dealer comes to check it. After being away for three weeks, an dthe engine was tilted up fully, I came back to find oil in the motor well under one of my...
  2. C

    Opinions on 250 making soot below exhaust

    I have had HO2 issues onall three of my 250s leas than 100 hours and 1 1/2 years old. one engine just had the ecu replaced one reason was that engine was burning 1.5 - 2 gph more that the other two. Since replacing the ecu, fuel burn is pretty close to the other two about .5 gph higher, but it...
  3. C

    More issues with Almost New 250

    So I repowered in Dec 2017 trip 250s had oxygen sensor issues with all three engines, now this. starboard engine used to turn 6000+ now struggles to reach 5500 the green ecc light on the tach on that wngine does not come on any more, but the other engines do, this engine also burns 1.5 - 2 gph...
  4. C

    Old Gasoline

    The gas in my boat is almost 10 months old (250 gallons) no I did not put stabil in the tank as it usually only lasts 6-8 weeks. Any recommendations as I am sure it has lost some of its potency.
  5. C

    Honda 250 HO2

    Have others been having issues with the oxygen sensors? all three of my basically new (80 hours) engines are having issues two of them are having alarms at speed which results in having to slow down and restart. Also have an issue from day 1 with one of the engines showing the wrench symbol...
  6. C

    Honda 259 Nema 2000 t

    Hi All, just wondering if anyone has a list of output scentences for the 250. I want to cross reference them (if possible) with my Garmin 4212 thanks
  7. C

    Mechanics, bah!at

    Have felt for a while the throttle on one engine was not opening all the way. My mechanic said he checked it, and it is! Well SeaHawk man convinced me to order a shop Manuel for the 250, and according to section 3-11 the spec for the "open" side of the theottle body should be 10mm, mine is...
  8. C

    Question for CHawk and others

    So my mechanic is telling me Its bad for my engine to rev it in netural, at the dock to 2000 rpm, I say bs, what about you guys?
  9. C

    Props on Trip setup, anyone evre heard of this?

    cmerc , Today 09:35 AM I recently repowered with trip Honda 250's, and have been trying different props. I am convinced that my port and starboard engines throttles are not opening all the way. Boat is an intrepid 377 walkaround, spinning Mirage plus 14 3/4 x 21. Center engine turns 6200 Port...
  10. C

    New 250 hp issue

    Recently repowered with trip 250s they now have just under 40 hours and they have been great till now. I have been playing with props and finally got a chance to try new Mirage plus 14 3/4 x 21. Outer engines turned 5900, & 6000, center hit 6200. Heres the issue, at 5200 and above it runs...
  11. C

    BF225 Question

    As some may recall I gave been having issues on and of with one engine so heres my question as best as I can explain and ask it. At 3300 rpm it sounds an alarm, starts to act like its missing, and slows down, it will do this whether it is attempting to get on plane, so with a load on it, or id...
Back
Top