Logo
FULL SITE MENU

Search results

  1. W

    90 hp force tilt trim

    I have a 90 horsepower Mercury Force the tilt trim has multiple leaks strip bolts and just isn't working can I eliminate it and still run. I will use a long bolt of something to keep boat in trimmed position. I'm getting a cheap winch and bolting it to the floor and I'm making plate to attach...
  2. W

    Flushing motor

    I've added a Telltale to the top of the block above the thermostat can I flush the motor through there
  3. W

    90 hp force water pump

    Boat outtoday only problem today was weak water stream from tell tale pump check this picture i didnt have this washer in place not sure if it belongs there or not Thanks
  4. W

    Stalling

    So I have a Mercury Force 90 horsepower had a bunch of work done to it over the winter runs great then suddenly stalls started back up can only get a quarter of the speed back out of it and I smell gas had the carburetors cleaned what else would it be the person that I bought the motor from said...
  5. W

    90 horsepower thermostat

    can I change from the 130 to the 143t hermostat I find those more available Will it cause problems?? I have a 90 hp force
  6. W

    Mercury 45

    Need help finding gaskets Everyplace i try the serial number isnt found. S/N 4419885 Thanks for any help Bill Its a 4.5 hp.
  7. W

    All done lower unit 1 extra part

    http://i484.photobucket.com/albums/rr208/wismo1/Mobile%20Uploads/20160321_172158.jpg Just finishing up lower unit and have one part i dont remember
  8. W

    What is it

    so I have another thread going about my lower unit but I started working on my fuel pump rebuild finished it cleanedhttp://s484.photobucket.com/user/wismo1/media/Mobile%20Uploads/20160316_183010.jpg.html?filters[user]=77829857&filters[recent]=1&sort=1&o=0"]http://...
  9. W

    Fuel pump rebuild

    Is this diaphragm look normal with a bulge cant find rebuild kit so ordering all parts individual.http://
  10. W

    bent prop shaft

    so I suspect my propeller shaft is bent I have pulled it out and will check for run out on my Lathe is there any special procedure for reinstallation I have the manual but it covers a lot of different Force Motors so I'm not sure if that is in there
  11. W

    Carb clean

    is there a write up on carb cleaning for the 93 90 hp merc force looks easy to remove them do i meed new bowl gaskets.
  12. W

    1993 force cyliner head

    well since i have 4 feet of snow all around the boat I pondering spring time improvements to the motor. I know i will need a head gasket soon. My question is on the cylinder head right near where the spark plugs are screwed in is a bolt does the cylinder head separate further once these bolts...
  13. W

    1993 Force no spark

    Hi Guys i just joined and am new to the boating community. I have a 1993 Force on a 16 foot sunliner. I took it out the other day for the second time since i got it started the motor THEN stopped to get further out duE to shallow water and have not been able to start motor since. I HAVE NO SPARK...
Back
Top