Logo
FULL SITE MENU

Search results

  1. B

    manifolds

    I have a 320 ce-b cat motor and am shopping around for exhaust manifold and elbows. Does anyone have any options for o.e.m. besides Volvo Penta Store? Does anybody have any idea how long they last in brackish water? Thanks in advance. Top
  2. B

    gimble bearing and seal

    I have a DPS-B drive and am in the process of replacing the gimble bearing. I have the old bearing out and ready to install the new one. However I have two questions. 1. The Volvo shop manual says on page 220 "Position the gimbal bearing with the ring slots facing in towards shield. When I...
  3. B

    Neutra salt

    I have a Four Winns with the Neutra salt system .Does anyone know if there is any differance between Neutra salt and Salt-Away.
  4. B

    Bellows DPS-B

    I would like to change the bellows on my 2015 DPS-B (#A378340). I did an internet search and came up with nothing as far as the procedure goes. Maby because its a recient drive? The V.P. Workshop manual gives the gimbal ring removal, pivot housing removal and explains the positioning and...
  5. B

    power source

    I have a 2015 275V and will be installing a neutra salt system. The instruction booklet tells me to power it with a power source that is only hot with the engine running. I have a tester but am looking for any input that could save me from taking anything apart that I don't have to. Thanks in...
  6. B

    Power trim not holding

    I have a 2006 Larson 260 with a 5.7 GXI-G with a DP-SM 1.95 drive. After getting on plane at a comfortable 3400 r.p.m. I usually set the trim. In less than one minute the set will drop off to nothing. Last year I had the pump assembly replaced by a Volvo dealer. The new pump did not help the...
  7. B

    Trim problem

    My boat is a 2006 Larson 260 with a 5.7 GXI with DPS drive. 110 hours on it. At the end of this season the drive slowly returns to its "O" trim position while underway. The boat is out for the season with the drive in storage. I was thinking about having the cylinders rebuilt over the winter and...
  8. B

    57 low max rpm

    I have a new 26 ft. express cr I have a new 26 ft. express cruiser with a 5.7 GXI Duo prop. The manual says 320 h.p. @5200 r.p.m. I only have 10 hours on the boat and for a "short" period of time I opened it up and noticed only 3600 r.p.m.'s. Should I be concerned at this point of break-in? As...
  9. B

    57 gxi impeller

    I am awaiting a new boat with I am awaiting a new boat with a 5.7gxi. The engine is raw water cooled with the pump mounted on the front of the crankshaft. Can the impeller be changed with the boat in the water.
Back
Top